Fixing Your Hardwood Floors

It is extremely true that wood floors will increase the value of your home. If your wood floors are damaged they might in fact detract from your home’s overall worth not to discuss aesthetic appeal. Scratches, scuffs and gouges are the most common issues wood floor owners face. Squeaking can also be a frustrating issue. Prior to you can start fixing, you require to determine the degree of the damage. If the stain or scratch has actually not penetrated the wood, you’re dealing with a surface problem, these are typically easier to handle. If the stain or scratch has actually permeated into the wood the fix is bit more involved however still not too difficult.

Surface scratches can generally be repaired with touch-up package produced urethane finishes, you can find these at just about any wood flooring merchant or online. Eliminating surface stains depends upon the type of stain it is. A lot of commonly you’ll be handling water and family pet stains. For these use a wood flooring cleaner established specifically for urethane finishes to eliminate the stain. More persistent discolourations may require additional scrubbing with the cleaner and a wood flooring scrub pad produced urethane floors.


For scratches that have actually permeated into the wood you need to be able merely wax the location until the scratch is no longer visible. Scuff marks can be taken care by using steel wool to rub in the wax and then hand buffing the area. Simply beware when using something abrasive like steel wool on your wood floors, if you rub too tough you could cause more damage to the wood. For water discolourations rub the area with fine steel wool and after that wax. If this doesn’t get the stain out entirely, gently sand the area with great sandpaper, and tidy it using steel wool and mineral spirits or a wood flooring cleaner. As soon as the floor is dry, use stain, wax it and after that hand enthusiast it.u

For permeated family pet discolourations rub the spot with fine steel wool and wax. If this does not get the stain out totally, lightly sand the area with great sandpaper, and clean it using steel wool and mineral spirits or a wood flooring cleaner. As soon as the flooring is dry, apply stain, wax it and then hand enthusiast it. If the stain is actually stubborn, apply a family bleach or vinegar and enable it to soak for an hour. Rinse the flooring with a wet cloth, clean dry and smooth with fine sandpaper. Once again apply stain, wax it and hand buff it.

Regular upkeep can assist avoid scratches and stains from permeating into the wood. Make sure to vacuum and/or dry mop your wood flooring once a week. Be sure never to wax a floor that has actually been covered with a polyurethane finish. That would make it impossible to re-coat your wood flooring in the future without very first sanding it.

Sheffield Glazier Can Help You With All Your Glazing Needs – Click Here to Visit Our Website.

Leave a Reply

Your email address will not be published. Required fields are marked *